High Rate/Low Complexity Space-Time Block Codes for 2x2 Reconfigurable MIMO Systems

In this paper, we propose a full-rate full-diversity space-time block code (STBC) for 2x2 reconfigurable multiple-input multiple-output (MIMO) systems that require a low complexity maximum likelihood (ML) detector. We consider a transmitter equipped with a linear antenna array where each antenna element can be independently configured to create a directive radiation pattern toward a selected direction. This property of transmit antennas allow us to increase the data rate of the system, while reducing the computational complexity of the receiver. The proposed STBC achieves a coding rate of two in a 2x2 MIMO system and can be decoded via an ML detector with a complexity of order M, where M is the cardinality of the transmitted symbol constellation. Our simulations demonstrate the efficiency of the proposed code compared to existing STBCs in the literature.Comment: arXiv admin note: text overlap with arXiv:1505.0646

High-Rate Space Coding for Reconfigurable 2x2 Millimeter-Wave MIMO Systems

Millimeter-wave links are of a line-of-sight nature. Hence, multiple-input multiple-output (MIMO) systems operating in the millimeter-wave band may not achieve full spatial diversity or multiplexing. In this paper, we utilize reconfigurable antennas and the high antenna directivity in the millimeter-wave band to propose a rate-two space coding design for 2x2 MIMO systems. The proposed scheme can be decoded with a low complexity maximum-likelihood detector at the receiver and yet it can enhance the bit-error-rate performance of millimeter-wave systems compared to traditional spatial multiplexing schemes, such as the Vertical Bell Laboratories Layered Space-Time Architecture (VBLAST). Using numerical simulations, we demonstrate the efficiency of the proposed code and show its superiority compared to existing rate-two space-time block codes

High-Rate and Low-Complexity Space-Time Block Codes for 2x2 MIMO Systems

The main design criteria for space-time block codes (STBCs) are the code rate, diversity order, coding gain, and low decoder complexity. In this letter, we propose a full-rate full-diversity STBC for 2 × 2 multiple-input multiple-output (MIMO) systems with a substantially lower maximum likelihood (ML) detection complexity than that of existing schemes. This makes the implementation of high-performance full-rate codes feasible for practical systems. Our numerical evaluation shows that the proposed code achieves significantly lower decoding complexity while maintaining a similar performance compared to that of existing rate-2 STBCs

Mimo Communication Systems with Reconfigurable Antennas

RÉSUMÉ Les antennes reconfigurables sont capables d'ajuster dynamiquement les caractéristiques de leur diagramme de rayonnement, par exemple, la forme, la direction et la polarisation, en réponse aux conditions environnementales et exigences du système. Ces antennes peuvent aussi être utilisées en conjonction avec des systèmes à entrées multiples sorties multiples (MIMO) pour améliorer davantage la capacité et la fiabilité des systèmes sans fil. Cette thèse étudie certains des problèmes dans les systèmes sans fil équipés d'antennes reconfigurables et propose des solutions pour améliorer la performance du système. Dans les systèmes sans fil utilisant des antennes reconfigurables, la performance atteignable par le système dépend fortement de la connaissance de la direction d'arrivée (DoA) des signaux souhaités et des interférences. Dans la première partie de cette thèse, nous proposons un nouvel algorithme d'estimation de la DoA pour les systèmes à entrer simple et sortie simple (SISO) qui possèdent un élément d'antenne reconfigurable au niveau du récepteur. Contrairement à un système utilisant un réseau d'antennes conventionnelles à diagramme de rayonnement fixe, où la DoA est estimée en utilisant les signaux reçus par plusieurs éléments, dans le réseau d'antennes avec l'algorithme proposé, la DoA est estimée en utilisant des signaux reçus d'un élément d'antenne unique pendant qu'il balai un ensemble de configurations de diagramme de rayonnement. Nous étudions aussi l'impact des différentes caractéristiques des diagrammes de rayonnement utilisés, tels que la largeur du faisceau de l'antenne et le nombre d'étapes de numérisation, sur l'exactitude de la DoA estimée. Dans la deuxième partie de cette thèse, nous proposons un système de MIMO faible complexité employant des antennes reconfigurables sur les canaux sélectifs en fréquence pour atténuer les êtes de trajets multiples et donc éliminer l'interférence entre symboles sans utiliser la technique de modulation multiplexage orthogonale fréquentiel (OFDM). Nous étudions aussi l'impact de la propagation et de l'antenne angulaire largeur de faisceau sur la performance du système proposé et faire la comparaison avec la performance du système MIMO-OFDM. Dans la troisième partie de cette thèse, nous fournissons des outils analytiques pour analyser la performance des systèmes sans _l MIMO équipés d'antennes reconfigurables au niveau du récepteur. Nous dérivons d'abord des expressions analytiques pour le calcul de la matrice de covariance des coefficients des signaux reçus empiétant sur un réseau d'antennes reconfigurables en tenant compte de plusieurs caractéristiques de l'antenne tels que la largeur du faisceau, l'espacement d'antenne, l'angle de pointage ainsi que le gain de l'antenne. Dans cette partie, nous considérons un récepteur MIMO reconfigurable où le diagramme de rayonnement de chaque élément d'antenne dans le réseau peut avoir des caractéristiques différentes. Nous étudions également la capacité d'un système MIMO reconfigurable en utilisant les expressions analytiques dérivées.----------ABSTRACT Reconfigurable antennas are able to dynamically adjust their radiation pattern characteristics, e.g., shape, direction and polarization, in response to environmental conditions and system requirements. These antennas can be used in conjunction with multiple-input multiple-output (MIMO) systems to further enhance the capacity and reliability of wireless networks. This dissertation studies some of the issues in wireless cellular systems equipped with reconfigurable antennas and offer solutions to enhance their performance. In wireless systems employing reconfigurable antennas, the attainable performance improvement highly depends on the knowledge of direction-of-arrival (DoA) of the desired source signals and that of the interferences. In the first part of this dissertation, we propose a novel DoA estimation algorithm for single-input single-output (SISO) system with a reconfigurable antenna element at the receiver. Unlike a conventional antenna array system with fixed radiation pattern where the DoA is estimated using the signals received by multiple elements, in the proposed algorithm, we estimate the DoA using signals collected from a set of radiation pattern states also called scanning steps. We, in addition, investigate the impact of different radiation pattern characteristics such as antenna beamwidth and number of scanning steps on the accuracy of the estimated DoA. In the second part of this dissertation, we propose a low-complexity MIMO system employing reconfigurable antennas over the frequency-selective channels to mitigate multipath effects and therefore remove inter symbol interference without using orthogonal frequency division multiplexing (OFDM) modulation. We study the impact of angular spread and antenna beamwidth on the performance of the proposed system and make comparisons with that of MIMO-OFDM system equipped with omnidirectional antennas. In the third part of this dissertation, we provide an analytical tool to analyze the performance of MIMO wireless systems equipped with reconfigurable antennas at the receiver. We first derive analytical expressions for computing the covariance matrix coefficients of the received signals impinging on a reconfigurable antenna array by taking into account several antenna characteristics such as beamwidth, antenna spacing, antenna pointing angle, and antenna gain. In this part, we consider a reconfigurable MIMO receiver where the radiation pattern of each antenna element in the array can have different characteristics. We, additionally, study the capacity of a reconfigurable MIMO system using the derived analytical expressions

Reconfigurable Antennas in mmWave MIMO Systems

The key obstacle to achieving the full potential of the millimeter wave (mmWave) band has been the poor propagation characteristics of wireless signals in this band. One approach to overcome this issue is to use antennas that can support higher gains while providing beam adaptability and diversity, i.e., reconfigurable antennas. In this article, we present a new architecture for mmWave multiple-input multiple-output (MIMO) communications that uses a new class of reconfigurable antennas. More specifically, the proposed lens-based antennas can support multiple radiation patterns while using a single radio frequency chain. Moreover, by using a beam selection network, each antenna beam can be steered in the desired direction. Further, using the proposed reconfigurable antenna in a MIMO architecture, we propose a new signal processing algorithm that uses the additional degrees of freedom provided by the antennas to overcome propagation issues at mmWave frequencies. Our simulation results show that the proposed reconfigurable antenna MIMO architecture significantly enhances the performance of mmWave communication systems

A New Reconfigurable Antenna MIMO Architecture for mmWave Communication

The large spectrum available in the millimeter- Wave (mmWave) band has emerged as a promising solution for meeting the huge capacity requirements of the 5th generation (5G) wireless networks. However, to fully harness the potential of mmWave communications, obstacles such as severe path loss, channel sparsity and hardware complexity should be overcome. In this paper, we introduce a generalized reconfigurable antenna multiple-input multiple-output (MIMO) architecture that takes advantage of lens-based reconfigurable antennas. The considered antennas can support multiple radiation patterns simultaneously by using a single RF chain. The degrees of freedom provided by the reconfigurable antennas are used to, first, combat channel sparsity in MIMO mmWave systems. Further, to suppress high path loss and shadowing at mmWave frequencies, we use a rate-one space-time block code. Our analysis and simulations show that the proposed reconfigurable MIMO architecture achieves full-diversity gain by using linear receivers and without requiring channel state information at the transmitter. Moreover, simulations show that the proposed architecture outperforms traditional MIMO transmission schemes in mmWave channel settings

Global, regional, and national burden of stroke and its risk factors, 1990–2019: a systematic analysis for the Global Burden of Disease Study 2019

Background Regularly updated data on stroke and its pathological types, including data on their incidence, prevalence, mortality, disability, risk factors, and epidemiological trends, are important for evidence-based stroke care planning and resource allocation. The Global Burden of Diseases, Injuries, and Risk Factors Study (GBD) aims to provide a standardised and comprehensive measurement of these metrics at global, regional, and national levels. Methods We applied GBD 2019 analytical tools to calculate stroke incidence, prevalence, mortality, disability-adjusted life-years (DALYs), and the population attributable fraction (PAF) of DALYs (with corresponding 95% uncertainty intervals [UIs]) associated with 19 risk factors, for 204 countries and territories from 1990 to 2019. These estimates were provided for ischaemic stroke, intracerebral haemorrhage, subarachnoid haemorrhage, and all strokes combined, and stratified by sex, age group, and World Bank country income level. Findings In 2019, there were 12·2 million (95% UI 11·0–13·6) incident cases of stroke, 101 million (93·2–111) prevalent cases of stroke, 143 million (133–153) DALYs due to stroke, and 6·55 million (6·00–7·02) deaths from stroke. Globally, stroke remained the second-leading cause of death (11·6% [10·8–12·2] of total deaths) and the third-leading cause of death and disability combined (5·7% [5·1–6·2] of total DALYs) in 2019. From 1990 to 2019, the absolute number of incident strokes increased by 70·0% (67·0–73·0), prevalent strokes increased by 85·0% (83·0–88·0), deaths from stroke increased by 43·0% (31·0–55·0), and DALYs due to stroke increased by 32·0% (22·0–42·0). During the same period, age-standardised rates of stroke incidence decreased by 17·0% (15·0–18·0), mortality decreased by 36·0% (31·0–42·0), prevalence decreased by 6·0% (5·0–7·0), and DALYs decreased by 36·0% (31·0–42·0). However, among people younger than 70 years, prevalence rates increased by 22·0% (21·0–24·0) and incidence rates increased by 15·0% (12·0–18·0). In 2019, the age-standardised stroke-related mortality rate was 3·6 (3·5–3·8) times higher in the World Bank low-income group than in the World Bank high-income group, and the age-standardised stroke-related DALY rate was 3·7 (3·5–3·9) times higher in the low-income group than the high-income group. Ischaemic stroke constituted 62·4% of all incident strokes in 2019 (7·63 million [6·57–8·96]), while intracerebral haemorrhage constituted 27·9% (3·41 million [2·97–3·91]) and subarachnoid haemorrhage constituted 9·7% (1·18 million [1·01–1·39]). In 2019, the five leading risk factors for stroke were high systolic blood pressure (contributing to 79·6 million [67·7–90·8] DALYs or 55·5% [48·2–62·0] of total stroke DALYs), high body-mass index (34·9 million [22·3–48·6] DALYs or 24·3% [15·7–33·2]), high fasting plasma glucose (28·9 million [19·8–41·5] DALYs or 20·2% [13·8–29·1]), ambient particulate matter pollution (28·7 million [23·4–33·4] DALYs or 20·1% [16·6–23·0]), and smoking (25·3 million [22·6–28·2] DALYs or 17·6% [16·4–19·0]). Interpretation The annual number of strokes and deaths due to stroke increased substantially from 1990 to 2019, despite substantial reductions in age-standardised rates, particularly among people older than 70 years. The highest age-standardised stroke-related mortality and DALY rates were in the World Bank low-income group. The fastest-growing risk factor for stroke between 1990 and 2019 was high body-mass index. Without urgent implementation of effective primary prevention strategies, the stroke burden will probably continue to grow across the world, particularly in low-income countries.publishedVersio

Global, regional, and national burden of stroke and its risk factors, 1990-2019: a systematic analysis for the Global Burden of Disease Study 2019

Background Regularly updated data on stroke and its pathological types, including data on their incidence, prevalence, mortality, disability, risk factors, and epidemiological trends, are important for evidence-based stroke care planning and resource allocation. The Global Burden of Diseases, Injuries, and Risk Factors Study (GBD) aims to provide a standardised and comprehensive measurement of these metrics at global, regional, and national levels. Methods We applied GBD 2019 analytical tools to calculate stroke incidence, prevalence, mortality, disability-adjusted life-years (DALYs), and the population attributable fraction (PAF) of DALYs (with corresponding 95% uncertainty intervals UIs]) associated with 19 risk factors, for 204 countries and territories from 1990 to 2019. These estimates were provided for ischaemic stroke, intracerebral haemorrhage, subarachnoid haemorrhage, and all strokes combined, and stratified by sex, age group, and World Bank country income level. Findings In 2019, there were 12.2 million (95% UI 11.0-13.6) incident cases of stroke, 101 million (93.2-111) prevalent cases of stroke, 143 million (133-153) DALYs due to stroke, and 6.55 million (6.00-7.02) deaths from stroke. Globally, stroke remained the second-leading cause of death (11.6% 10.8-12.2] of total deaths) and the third-leading cause of death and disability combined (5.7% 5.1-6.2] of total DALYs) in 2019. From 1990 to 2019, the absolute number of incident strokes increased by 70.0% (67.0-73.0), prevalent strokes increased by 85.0% (83.0-88.0), deaths from stroke increased by 43.0% (31.0-55.0), and DALYs due to stroke increased by 32.0% (22.0-42.0). During the same period, age-standardised rates of stroke incidence decreased by 17.0% (15.0-18.0), mortality decreased by 36.0% (31.0-42.0), prevalence decreased by 6.0% (5.0-7.0), and DALYs decreased by 36.0% (31.0-42.0). However, among people younger than 70 years, prevalence rates increased by 22.0% (21.0-24.0) and incidence rates increased by 15.0% (12.0-18.0). In 2019, the age-standardised stroke-related mortality rate was 3.6 (3.5-3.8) times higher in the World Bank low-income group than in the World Bank high-income group, and the age-standardised stroke-related DALY rate was 3.7 (3.5-3.9) times higher in the low-income group than the high-income group. Ischaemic stroke constituted 62.4% of all incident strokes in 2019 (7.63 million 6.57-8.96]), while intracerebral haemorrhage constituted 27.9% (3.41 million 2.97-3.91]) and subarachnoid haemorrhage constituted 9.7% (1.18 million 1.01-1.39]). In 2019, the five leading risk factors for stroke were high systolic blood pressure (contributing to 79.6 million 67.7-90.8] DALYs or 55.5% 48.2-62.0] of total stroke DALYs), high body-mass index (34.9 million 22.3-48.6] DALYs or 24.3% 15.7-33.2]), high fasting plasma glucose (28.9 million 19.8-41.5] DALYs or 20.2% 13.8-29.1]), ambient particulate matter pollution (28.7 million 23.4-33.4] DALYs or 20.1% 16.6-23.0]), and smoking (25.3 million 22.6-28.2] DALYs or 17.6% 16.4-19.0]). Interpretation The annual number of strokes and deaths due to stroke increased substantially from 1990 to 2019, despite substantial reductions in age-standardised rates, particularly among people older than 70 years. The highest age-standardised stroke-related mortality and DALY rates were in the World Bank low-income group. The fastest-growing risk factor for stroke between 1990 and 2019 was high body-mass index. Without urgent implementation of effective primary prevention strategies, the stroke burden will probably continue to grow across the world, particularly in low-income countries

Digital beamforming implementation of switch-beam smart antenna system by using integrated digital signal processor and field-programmable gate array

Smart antenna technologies are emerging as an innovative way to meet the growing demand for more powerful, cost-effective and highly efficient wireless systems. If this system is implemented successfully, it could significantly improve the performance of wireless systems in terms of data rates, coverage and range. The best near-term application opportunities for smart antennas are wireless local area networks (WLANs), mobile DBS, WiMax, and cellular areas. The application targeted for this research is WiMax. Regardless of the application, hardware implementation of smart antenna is very challenging and complicated. Therefore, our focus is just on the beamforming and sidelobe cancellation for the WiMax downlink transmission. In downlink, we try to form and steer the beam according to the user location. Also, for more antenna radiation pattern optimization, the sidelobe cancellation is performed base on the chebyshev algorithm. In this respect, the system is firstly modeled by MATLAB software. After modeling, the algorithm is implemented in DSP. By using the Hardware- In-Loop facility of DSP, the comparison between hardware implementation and software modeling is performed. The results indicate that the digital beamforming and sidelobe cancellation are successfully implemented. At the next stage of the project, the signal management should be done before transmission to the expansion board. This management is necessary, in order to make data suitable for expansion board. After signal management the channels need to be split into sixteen antenna array elements by a means of FPGA board. To do so, the verilog code is written for programming the FPGA base on the signal which is come from DSP. The simulation results and measurement show that channels separation and synchronization is done successfully. By doing abovementioned procedure, the digital beamforming and sidelobe cancellation are implemented in baseband frequency